CASE STUDIES

FIELD REPORTS

Every build tells a story. From the challenge to the solution — explore our engineering portfolio.

2025 Bronco 2-Door on 37s
BUILD #001

2025 Ford Bronco 2-Door

2025 Bronco 2-Door on 37s

THE CHALLENGE

Customer wanted a big, aggressive stance. Install note: the rear crossmember must be cut out during installation of this 5" Rough Country lift kit, so plan the build accordingly.

THE SOLUTION

Wrapped up this 2025 Ford Bronco 2-Door with a 5" Rough Country lift kit featuring M1R shocks all the way around. After the lift install, the customer added a fresh set of 37" tires to finish off the build. Big lift, aggressive stance, and plenty of attitude. Ready to turn heads!

KEY SPECS

5" Rough Country lift kit | M1R shocks front & rear | 37" tires | Rear crossmember cut required

Ryan's Bronco Trail Build
BUILD #002

Ford Bronco

Ryan's Bronco Trail Build

THE CHALLENGE

Maximize trail capability and clearance on a modern Ford Bronco while maintaining street drivability.

THE SOLUTION

3.5" BDS lift kit paired with Fabtech inner tie rod ends for improved steering geometry, BDS rear track bar for axle correction, and a Rough Country spare tire carrier for full-size spare mounting.

KEY SPECS

3.5" BDS Lift Kit | Fabtech Inner Tie Rod Ends | BDS Rear Track Bar | Rough Country Spare Tire Carrier | Beadlock Wheels | All-Terrain Tires

Appalachian Hauler
BUILD #003

2022 Toyota Tacoma TRD Pro

Appalachian Hauler

THE CHALLENGE

Client needed a capable daily driver that could handle the tight, muddy trails of Hatfield-McCoy and Stoney Lonesome OHV without sacrificing highway manners.

THE SOLUTION

Dialed in a long-travel suspension setup with underbody armor and upgraded axles. Handles West Virginia mountain mud and creek crossings as easily as the interstate.

KEY SPECS

King 2.5 coilovers | Total Chaos UCAs | CBI full skid set | Rigid lighting | 35" BFG KM3 | Diff breather kit

Ranger Engine & Suspension Overhaul
BUILD #004

2004 Ford Ranger 4.0 V6

Ranger Engine & Suspension Overhaul

THE CHALLENGE

High-mileage 4.0L SOHC presenting with a worn timing chain — classic rattle on cold starts, rough idle, and risk of chain failure. Front end also had significant play from failed ball joints, making steering unsafe on and off road.

THE SOLUTION

Full timing chain kit replacement including guides, tensioners, and sprockets on the 4.0L SOHC. Complete front end refresh with new upper and lower ball joints, front end alignment, and full inspection of related suspension components to restore safe, precise handling.

KEY SPECS

4.0L SOHC Timing Chain Kit | Upper & Lower Ball Joint Replacement | Front End Alignment | Engine Resealed | Coolant Flush | Full Safety Inspection

Blue Ridge Overlander
BUILD #005

2023 Jeep Gladiator Rubicon

Blue Ridge Overlander

THE CHALLENGE

Family wanted a self-sufficient overland rig for exploring the Blue Ridge Parkway backcountry, Monongahela National Forest, and Skyline Drive dispersed camping routes.

THE SOLUTION

Transformed the Gladiator into a mobile basecamp built for East Coast forests — rooftop tent, dual battery system, and enough range to run the length of the Appalachian corridor.

KEY SPECS

AEV 3.5" DualSport | Rooftop tent | 200Ah lithium | ARB fridge | Aux fuel tank | 600mi range | Recovery gear package

38.9948° N|80.4673° W|ELEV 1,045ft|BAY STATUS: OPERATIONAL
Kombustion Race Worx LLC

Precision race & offroad engineering. Custom builds, performance parts, and elite-level repair services.

SERVICES

Suspension Lifts

Armor & Protection

Recovery Systems

Full Custom Builds

Diagnostics & Tune

HQ LOCATION

Weston, West Virginia
(304) 517-0081
kombustionraceworx@yahoo.com
© 2026 KOMBUSTION RACE WORX. ALL SYSTEMS OPERATIONAL.
SHOP OPEN — MON-SAT 0700-1800